Crystal AB film process operation flow is as follows:
1: Open sheet A film and tear the protective film
2: Print out your pattern with a printer with a white glossy oil nozzle
3: : After the picture is printed on the sheet A film, the temperature of the laminating machine can be increased to 70-80 degrees Celsius
4: Print directly on sheet A film
5: When the pattern font is small, the temperature can be appropriately increased, or the speed of the laminating machine can be slowed down, or the small font pattern file can be made into a continuous piece of glossy oil to increase the viscosity. Prevent flanging to reduce film tension! Heat cover do not stretch too tight, there will be shrinkage after cooling!
Qing tip: If the weather is too cold in the north, the low temperature is not sticky, please heat the crystal label to increase the adhesive reaction, can be heated with a hot blow, tear off the transparent bottom film, evenly press the mask, and tear the mask at 0 Angle.
The crystal direct injection process operation flow is as follows:
Baofeng direct injection crystal label machine is fully automatic production, as long as the release film and B film respectively installed, output printing can automatically tear film automatic printing automatic laminating automatic paper receiving. Conditional can be equipped with automatic profiler cutting machine.
